High Flow Filter Cartridges (PermeaFil)

Vens PermeaFil high flow filter cartridges are large-diameter pleated cartridges that carry a high flow through each element, so a housing needs far fewer cartridges for the same duty. They are offered in lengths from 10 to 60 inches.
Technical data
Lengths: 10 to 60 inches
Diameters: 83 mm (3.2 inch, 83HF series) and 130 mm (5.2 inch, 130SHF series)
Membranes: polypropylene (PP), polyethersulfone (PES) or PTFE
Retention ratings: 0.02 to 80 µm
Filter area per 10-inch length: 1.45 m² (83HF) and 2 m² (130SHF)
Typical flow per 10-inch length: up to 100 L/min (83HF) and up to 200 L/min (130SHF)
Maximum differential pressure: 0.4 MPa at 21 °C, 0.32 MPa at 60 °C, 0.24 MPa at 80 °C
Features
Made under controlled clean conditions, without adhesives or surfactants
High throughput and high dirt-holding capacity
A wide choice of membranes and retention ratings
Where they are used
Liquid crystal display and semiconductor wet processes
Filtration of organic solvents in the chemical industry
Pure water preparation
Other high-flow liquid filtration
Tell us the liquid, the flow rate, the retention rating and the housing or cartridge you use now. You can also look up an equivalent cartridge in FilterDex.
Guide: How to choose a filter cartridge
Certification: Vens Hydroluft is certified to ISO 9001:2015 and ISO 14001:2015, holds ASME and PED pressure vessel certification, and complies with FDA and EU food safety regulations.
Vens has more than 10,000 installations. Every unit is designed by engineers who studied at MIT, Stanford, Cornell, the IITs, Arizona State University and the University of Cincinnati and have worked in the industries that use this equipment, so it is sized for the job, built in the right materials and designed to proper factors of safety.