Product Information and Datasheet Disclaimer

Last updated: 15 November 2026.

Who we are. In this document, "Vens", "we", "us" and "our" mean Vens Hydroluft Corporation, Woodbridge, Ontario, Canada, and its affiliated companies, including Vens Hydroluft Private Limited (manufacturing, Chennai, India) and VDT Europa OÜ (Tallinn, Estonia). The Vens company that issues a quotation, order acknowledgement or invoice is the company you contract with.

This disclaimer applies to all product information we publish or supply: website pages, datasheets, brochures, catalogues, drawings, selection tables, FilterDex results, videos, presentations and verbal or email advice (together, "product information").

1. Guidance only

Product information is given in good faith and is believed to be accurate when published. It describes typical products under stated test or reference conditions. Capacities, oil removal rates, flows, pressures, temperatures, efficiencies, micron ratings, dimensions, weights and materials are indicative values. They are not guaranteed values and are not a warranty of performance in your application.

Actual performance depends on factors outside our control. These include the oil or liquid type, viscosity, temperature, emulsification, solids, debris, waves and turbulence, tank or sump geometry, installation, operation and maintenance.

2. Changes without notice

Vens owns its designs and improves them continually. We may change, upgrade, substitute or discontinue any product, material, component, specification or item of product information at any time, without notice and without obligation to modify products already supplied.

Always ask for the current datasheet and a written confirmation before ordering. The specification in our written quotation and order acknowledgement is the only binding specification.

3. Your responsibility for selection and use

• You are solely responsible for confirming that a product is suitable and safe for your intended use. This includes compatibility with your liquids and chemicals, hazardous-area (ATEX, IECEx or equivalent) classification, pressure and temperature limits, electrical supply and local regulations.

• Products must be installed, operated and maintained by competent, trained persons, in line with our manuals, safe working practices and applicable law.

• Do not exceed the ratings stated in the order acknowledgement and on the nameplate.

• Do not use product information in any way that could endanger people, property or the environment. Do not modify a product without our written approval.

4. No liability for reliance

To the fullest extent permitted by law, Vens accepts no liability for any loss, damage, injury, penalty or cost arising from the use of, or reliance on, product information. This includes harm to any person or property arising from the misuse, misapplication, incorrect installation or modification of a product, or from use outside its stated ratings.

Our only obligations are those set out in a signed contract and our Terms of Sale.

5. Certifications and approvals

Certifications, standards and approvals apply only to the specific products, models, sizes and materials for which they were issued, as stated in the relevant certificate or order acknowledgement. Examples include ISO management system certificates, ASME and PED pressure equipment, food-contact compliance and air filter test standards. A certification named on the website does not mean every product is certified. Certificates are available on request.

6. Illustrations

Photographs, renderings and drawings are for illustration. Supplied products may differ in colour, finish, accessories and arrangement.

7. Cross-references, other companies' names and comparisons

Names and part numbers of other manufacturers are used only to identify the parts our products replace or work with. Equivalence suggestions are guidance only and must be checked against your equipment.

FilterDex and our cross-reference pages list part numbers of other manufacturers with the micron rating, filter media and dimensions we hold for them. This data has been compiled from manufacturers' published catalogues and other publicly available sources. It has not been supplied, checked or approved by those manufacturers, and it may contain errors or be out of date, because manufacturers change part numbers and specifications without notice. Where a size is shown as to be confirmed, we have not verified it.

Words such as "equivalent", "replacement", "cross-reference", "corresponds to" and "fits" mean only that the Vens element is intended to fit the same housing, with the same nominal dimensions, micron rating and seal type. A Vens element is not the other manufacturer's part. It is not made, sold or approved by that manufacturer, and it is not claimed to be identical to it. Its performance, such as filtration ratio, dirt-holding capacity, collapse pressure and pressure drop, is as stated in the Vens datasheet and order acknowledgement, not in the other manufacturer's documents.

Before you order, check the dimensions, end caps, seals, micron rating, flow, pressure and fluid compatibility against your equipment and its manual. Using a replacement element may affect your equipment maker's warranty; it is your responsibility to check this. We confirm the match in writing in our quotation, and our responsibility is limited to the elements we supply, under our Terms of Sale.

Trade marks. HYDAC, Pall, Parker, Eppensteiner, MAHLE, STAUFF, Bosch Rexroth, Filtrec, Eaton, Internormen, Schroeder, Donaldson, ASTM and every other name, logo, product name and part number of another company that appears on this website are the trade marks or identifiers of their respective owners. They are used only to identify the products that ours replace or work with, or the standards and organisations referred to. Their use does not mean that any of those companies is connected with Vens, sponsors or endorses Vens or its products, or has approved any content on this website. Names and logos of customers identify organisations that have bought Vens products; they remain the property of their owners, and showing them does not imply endorsement.

Comparisons. Where we refer to other companies, their tools or their published figures, the information is taken from their own published material on the date stated and attributed to them. We have not verified it, and it describes their offering only as they present it.

8. Ownership

Product information is the property of Vens and is protected by copyright. It may not be copied, altered or passed to third parties without our written permission, except for evaluating our products.

9. Notices and corrections

If you believe that anything on this website is inaccurate or out of date, or uses your name, trade mark or other rights incorrectly, email sales@skimmer.co.in with the subject "Legal notice", the page address and the details. We review every notice promptly, and correct or remove material where that is appropriate.

Contact. Vens Hydroluft Corporation, 28 Christina Ciccolini Court, Woodbridge, Ontario, Canada. Email sales@skimmer.co.in. Telephone +1 289 622 1032.